Cold Shrink Tube For Communication Base Station

2022-11-25

The communication cold shrink tube (with built-in mastic cold shrink tube) provides a safe and simple way to seal and protect outdoor exposed cable joints, and is an ideal material to ensure reliable communication of wireless base stations. It is especially suitable for those places where there are many RRU equipment and antenna end connectors, small spacing, and limited operating space. Such as N-type connector and 1/2 jumper, Din head and 1/2 jumper, etc. It is a good substitute for waterproof tape.

Product requirements:

(1) The appearance of the cold shrink tube shall be clean and tidy, without scratches, cracks, flash, burrs and other defects; The support strip shall be free of burrs (before and after pulling).

(2) In order to ensure the waterproof effect, the cold shrink pipe needs to be internally sealed with mastic.

(3) The cold shrink pipe shall have good compatibility with the joint and sufficient holding force.

Product features:

● Easy to use, manual operation, without heat source and special tools

Built in mastic structure, good waterproof and sealing performance

● Elastic rubber, which always maintains its sealing pressure even when exposed outdoors

● Greatly reduce the working time during installation

● Antibacterial, ozone resistant and acid and alkali resistant properties are applicable to any environment

● It is easy to remove when it needs to be detected or disconnected

The communication cold shrink tube (with built-in plaster cold shrink tube) is mainly used in the installation of antenna feeder equipment for wireless network communication projects. The special communication cold shrink tube is pre expanded on a core rope that can be pulled out, which is easy to operate. It is only necessary to locate at the installation site and pull out the core rope. The cold shrink pipe itself shall have the tendency to shrink back to its original size, that is, it can increase the permanent radial pressure to form a reliable waterproof seal without heating and special tools. In addition, the cold shrink tube can be conveniently removed during system maintenance.

Founded in 2013, XXR is a global leading manufacturer of fiber optic splice protection sleeves, we are committed to research and development,production and sales of various of fiber optic splice protection sleeves for optical fiber termination equipment suchas ODF/patch panels,cable splice colsures,termination box,coss connecting cabinet etc.
The products are sold at home and abroad and have been well received by our customers.
XXR has a set of advanced equipment for producing fiber optic protection sleeves, all parts as steel rod,outer tube and inter tube are manufactured by ourselves, which enable us to controll the quality competely,and therefore provide the tomers with high quality products.
Always bear in mind that quality is the cornerstaone of XXR's survival and the reason why customers choose XXR.
XXR is committed to providing customers with high quality products,service andsolutions, and creating value for every customer.

 

Jinlei Hu

mr.hu@cdxxrtx.com.cn

 kim1810168412@gmail.com

 Online Store 

Disclaimer: This article is reproduced from other media. The purpose of reprinting is to convey more information. It does not mean that this website agrees with its views and is responsible for its authenticity, and does not bear any legal responsibility. All resources on this site are collected on the Internet. The purpose of sharing is for everyone's learning and reference only. If there is copyright or intellectual property infringement, please leave us a message.
© Copyright 2009-2020 Daily headlines      Contact Us   SiteMap